Symphony V30 flash file Stock Rom Firmware

Symphony phone is great and cheap to use. In developing countries most of the people own it. So, installing Symphony V30 flash file Stock Rom Firmware became a question. It is a process which people do not have much idea. In this article, I will talk about the process you need to follow. At first, you need to download few things before getting started.

  • USB driver: You need to download the USB driver that is compatible with the handset’s model. Install the driver on your computer. So, you can use the USB cable to connect it to your mobile phone. If the driver is already installed, you do not have to re-install it.
  • Flash File: Download the Symphony V30 flash file firmware on your computer. Extract it. This firmware will help to flash your handset. You can get it from any trusted website. Remember to download the one that is the model of the smartphone.
  • SP flash tool: You should next download Smart Phone Flash Tool on your computer. This tool will help to work with the flash file you downloaded before.

DOWNLOAD LINK

Symphony_Xplorer_V30_V01.5_UP29_V1.0_MT6572_150518171756

DOWNLOAD LINK

Symphony_V30_V01.7_UP29_V1.0_4.4.2.

DOWNLOAD LINK

Symphony_V30_0_V01.4_UP29_V1.0.

 

Steps To Install Symphony V30 flash file Stock Rom Firmware

After downloading all the necessary files, you must follow the steps. It will help you to do the flashing procedure. Let’s begin with the steps of Symphony V30 flash file Stock Rom Firmware.

Step 1

At first, turn off Symphony V30. Then remove the battery if it is possible.

Step 2

Extract the SP flash tool, and it will open a window. From there, locate the “flash_tool.exe.” file. Click on it. As it launches, a new window will start. Find the “Download” tab and click on it. The tab will expand and from there click on the “Scatter-loading” option.

Step 3

From there, browse to the Symphony V30 firmware folder. Select the file that has an extension named “scatter. text.”. It is the scatter file. Then press open which will take you to another window.Give ticks on all the files and then click on the download option. It will start the flashing process

Step 4

As soon as it starts, connect your cell phone to the computer with the help of the USB cable. Press volume down or up key after you connected the device. It will help the computer to detect the handset.

Step 5

Wait for some time while the flashing is going on. As it completes, you will see a visible green circle on the screen with a tick mark. Now, you can close the Sp flash tool window. Also, you can disconnect your cell phone from the computer by removing the USB cable.